合成生物学在生物基塑料制造中的应用

合成生物学是以工程学思想为指导，对天然生物基因组进行改造和重构，合成新的生物元件，构建新的代谢途径，生产新产品或获得新表型的新兴学科。生物基塑料是以天然物质为原料在微生物作用或化学反应下生成的塑料。利用合成生物学改造工程菌株的方法制备合成生物基塑料已经成为学术界和产业界关注的热点。本文综述了合成生物学的发展和重要的合成生物学技术，重点综述了利用合成生物学技术构建聚羟基烷酸酯、尼龙、聚乳酸和丁二酸丁二醇酯等生物基塑料聚合物单体及其衍生物的代谢途径和工程优化领域的研究进展。     

超声波辅助插层-剥离法制备煤系高岭土微粉的研究

我国煤系高岭土储量丰富,为满足造纸、纺织等行业个性化的需求,通常要对其进行深加工。以山西朔州煤系高岭土为原料,分别在恒温磁力搅拌和超声波作用下探究了煤系高岭土/二甲基亚砜(DMSO)插层复合物制备的最佳条件,在插层复合物的基础上对煤系高岭土进行超声辅助剥离,制备得到高岭土微粉,并利用XRD、SEM、BET、TG-DSC等方法分析表征样品。正交实验结果表明在磁力搅拌条件下DMSO用量、插层时间以及插层温度均对插层率具有一定的影响,引入超声波有利于高岭土插层率的提升。插层复合物经超声辅助剥离后晶粒厚度明显减小,高岭土片层状结构大体上呈现碎片化,仅保留少部分大的片状结构,其边缘碎化,整体上也出现碎裂的趋势。剥离样品的比表面积和孔径均大幅度增加,为硬质高岭土的剥离和超微细粉体的制备提供了新的思路。     

Pressureless sintering and properties of boron carbide composite materials

Boron carbide and Tantalum boride composites were prepared by pressureless sintering of B₄C with addition of TaC powder. The effect of TaC addition on the sinterability of boron carbide was studied. High densified ceramic with a relative density of 98.7% was obtained at sintering temperature of 2250°C. The composition and the microstructure of the dense composites are characterized by means of x-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive x-ray spectroscopy (EDX). The studies show that the composites contain boron carbide, TaB₂, and carbon phases with a homogeneous structure. In addition, the correlation between the composition and the electrical conductivity was investigated. The electrical conductivity of the composite increased with increasing addition of TaC, and a change in conduction behavior from semiconducting to metallic was observed. High hardness value of 28.49 ± 1.33 GPa was obtained by the sample with 30 wt% TaC addition.     

基于传递路径试验分析的车用风机噪声优化

针对某国产车型怠速开空调时轴流风机工作引起车内噪声偏大的问题,建立了传递路径分析模型,研究了风机振动传递率试验及分析方法。为保证传递函数的精度,采用矩阵求逆法获取车身端连接点的耦合激励力。结果表明,上横梁风机总成左安装点y向对车内噪声的贡献量最大。风机总成模态频率与激励力频率重合产生共振,通过优化风机总成隔振垫动刚度的方法,将激励力频率与风机总成的模态频率避开,较好地解决了该车内噪声问题。该传递路径研究为车用风机噪声控制提供了思路和依据。     

Scheduling distributed flowshops with flexible assembly and set-up time to minimise makespan

The scheduling problems under distributed production or flexible assembly settings have achieved increasing attention in recent years. This paper considers scheduling the integration of these two environments and proposes an original distributed flowshop scheduling problem with flexible assembly and set-up time. Distributed production stage is deployed several homogeneous flowshop factories that process the jobs to be assembled into final products in the flexible assembly stage. The objective is to find a schedule, including a production subschedule for jobs and an assembly subschedule for products, to minimise the makespan. Such a scheduling problem involves four successive decisions: assigning jobs to production factories, sequencing jobs at every factory, designating an assembly machine for each product and sequencing products on each assembly machine. The computational model is first established, and then a constructive heuristic (TPHS) and two hybrid metaheuristics (HVNS and HPSO) are proposed. Numerical experiments have been carried out and results validate the algorithmic feasibility and effectiveness. TPHS can obtain reasonable solutions in a shorter time, while metaheuristics can report better solutions using more yet acceptable time. HPSO is statistically comparable yet less robust compared with HVNS for small-scale instances. For the large-scale case, HPSO outperforms HVNS on both effectiveness and robustness.     

Fabrication of 3D Ni nanosheet array on Crofer22APU interconnect and NiO-YSZ anode support to sinter with small-size Ag nanoparticles for low-temperature sealing SOFCs

A novel low-temperature sealing method was developed to seal solid oxide fuel cells. The 3D Ni nanosheet array was pre-fabricated on faying surfaces of Crofer22APU interconnect and NiO-YSZ anode-support. Then it was covered with Au film without changing its morphology. This special nanostructure improved sintering efficiency between Ag nanoparticles and substrates. A dense joint was obtained at the low-temperature between 250 °C–300 °C. This method effectively avoided the oxidation of interconnect during sealing. When joints were sealed at 300 °C, the shear strength reached 16 MPa. The fracture was mainly located in the central Ag layer, presenting a significant plastic deformation. Due to the effective protection of Ni layer, joints also possessed excellent oxidation resistance in oxidizing atmosphere at 800 °C for 400 h. After high-temperature oxidation, the shear strength was increased to 23 MPa, revealing an increasement of 43.8% compared with the as-sealed condition (16 MPa). This sealing method has great potential in sealing solid oxide fuel cells. It also can be extended to seal other energy-conversion devices.     

六盘水市煤炭行业竞争战略分析

我国是富煤贫油少气的国家，煤炭是我国最重要的一次能源。但从能源激烈的竞争市场环境而言，当前我国煤炭行业发展出现了困境。为了更好地发展六盘水地区的煤炭行业，结合竞争战略理论和六盘水市的煤炭行业发展状况，运用PEST分析法和波特五力模型对六盘水市煤炭行业进行分析，得出整合资源，结合自身优势大力吸引人才，最终达到产业转型的生态化煤炭发展战略模型。分析结果可为提高六盘水煤炭行业竞争力提供理论支持。     

ZSM-5沸石膜用于生物油的脱水分离及其再生过程研究

在水热条件下通过无模板剂法合成了连续的ZSM-5沸石膜，并将其用于生物油的渗透汽化以进行高效脱水分离。ZSM-5沸石膜在强酸性、多组分的生物油体系中保持了很好的化学稳定性和优异的分离选择性，但在分离过程中面临着较强的膜污染问题，导致了膜通量的大幅下降。ZSM-5沸石膜的再生研究表明，膜的渗透通量随着再生温度的升高而逐渐提高。当再生温度为220℃时，ZSM-5沸石膜的渗透通量可以恢复至初始的88%。再生的机理研究表明，ZSM-5沸石膜中大量的晶内孔在生物油体系中极易被污染，从而导致渗透通量迅速下降；而相对较大的晶间孔却难以被完全堵塞，水分子在被污染的ZSM-5沸石膜中主要通过晶间孔进行渗透。上述结果表明，通过合理调控ZSM-5沸石膜的晶间孔的数量和尺寸大小可有效提升ZSM-5沸石膜在生物油中的渗透汽化脱水分离性能。     

碳布负载氮掺杂石墨烯及其电化学性能研究

以氧化石墨烯(GO)为原料、抗坏血酸为还原剂以及尿素作为氮掺杂剂,采用化学还原法制备了氮掺杂石墨烯凝胶(NGH).在制备NGH的时候引入混酸处理过的碳布,就得到了碳布负载氮掺杂石墨烯(NG/CC).利用扫描电子显微镜、X射线衍射、X射线光电子能谱和电化学方法对样品的形貌、结构、组成以及电化学性质进行了表征和测试.结果表明:GO被有效还原,氮被掺杂到了石墨烯中;NG/CC具有三维交联的多孔结构;在6 mol·L-1的KOH电解液中,NG/CC具有良好的超级电容器性能.在0.5 mA·cm-2电流密度下其比电容为35.2 mF·cm-2,在5 mA·cm-2的电流密度下循环4500圈后,NG/CC的容量保持率为98％,并且在这个过程中的库伦效率始终接近100％.